Permeability in a Triaxial Cell - 100mm manual to BS1377 part 6/6-100mm

This set of equipment has been put together to list what is necessary to carry out the test using the method described in BS1377 part 6 - additional items may be required, please refer to the standard

CodeBS1377-6/6-100mm
addthis

Part NoDescriptionQty
SL530 Triaxial Cell for 105mm diameter samples and pressures up to 1700kPa 1
SL590 100mm Top Cap with drainage lead and blanking plug 1
SL591 100mm Base Pedestal drilled for both bottom drainage and pore water pressure measurement 1
SL592 100mm Base Disc for undrained tests 1
SL593 100mm Porous Disc for drained tests (2 required per triaxial test) 2
SL594 100mm Membranes (pack of 10) 1
SL595 100mm O Rings (pack of 10) 1
SL596 100mm Membrane Stretcher suction device 1
SL597 100mm 2 Part Split Mould for cohesive soils and undisturbed samples 1
SL598 100mm 3 Part Split Former for non-cohesive soils, sands and disturbed samples 1
SL599 100mm Filter Drains (pack of 50) 1
SL495 100mm O Ring Placing Tool 1
SL626 4 Regulator Air/Water Panel 1
SL628 Bladder Air/Water Cylinder 3
SL630 Air Compressor 1000kPa 1
SL635 De-Airing Tank 1
SL640 Vacuum Pump - 140L/min 1
MH622 Heavy Wall Rubber Tubing H6.5 1
SL735 1000 kPa Pressure Transducer 1
SL738 De-Airing Block 1
SL701 4 Channel Digital Display 1
SL656 Twin Volume Change Apparatus 2
MH562 Timer Stopwatch, 24 hour 1
CH120 Silicone Release Agent, heavy duty 1
TH001/N BS593 A40C thermometer range 0 to 40 degrees C x 0.1 supplied with 3 point UKAS Calibration Certificate 1