Moisture density relationship, 10lb hammer to AASHTO T180
This set of equipment has been put together to list what is necessary to carry out the test using the method described in AASHTOT180 - additional items may be required, please refer to the standard
| Part No | Description | Qty |
|---|
| SL121 |
Proctor Compaction Mould ASTM |
1 |
| SL122 |
Modified Proctor Compaction Mould ASTM |
1 |
| SL123 |
Compaction Rammer ASTM 10lb |
1 |
| SL035 |
Hand Operated Extruder |
1 |
| BA114 |
Portable Electronic Balance 32kg capacity |
1 |
| BA165 |
High Resolution Laboratory Balance 6200g capacity |
1 |
| OV070 |
Oven D/Door 225 C/W Dig.Cont & Readout |
1 |
| MH550 |
300mm Straight Edge Trimming Blade |
1 |
| SV828 |
50.0mm - 2 inch x 8 inch woven wire stainless steel mesh sieve to ASTM E11 |
1 |
| SV821 |
19.0mm - 3/4 inch x 8 inch woven wire stainless steel mesh sieve to ASTM E11 |
1 |
| SV811 |
4.75mm - 1 1/2 inch x 8 inch woven wire stainless steel mesh sieve to ASTM E11 |
1 |
| MH588 |
Tray 600 x 600 x 75mm deep |
1 |
| SL170 |
Density Spoon |
1 |
| MH260 |
Gauging Trowel |
1 |
| MH540 |
Spatula/Palette Knife 100mm |
1 |
| MH585 |
Tray 300 X 300 X 50mm |
1 |
| MH570 |
Lever Lid Tin - 0.5L |
10 |
| MH577 |
Moisture Content Tin |
10 |
| SL123 |
Compaction Rammer ASTM 10lb |
1 |
